"COCK" (IN THE TECHNIQUE OF "CARDBOARD QUILLING")

"COCK" (IN THE TECHNIQUE OF "CARDBOARD QUILLING")

 For many years, I am a circle "Masterilka". With children 5-7 years doing various crafts. With the technique of " quilling ", of course, familiar to many. But it is no secret that corrugated cardboard is not cheap, we had to find a way out. And we found it! We do gofropoloski of conventional boxboard. We recently did with the guys next crafts - "cock."



Materials:
  1. Cardboard boxes from
  2. Color corrugated cardboard
  3. Spray
  4. Acrylic paints
  5. PVA glue
  6. Ribbon length 35 cm.
  7. Eyes (pair).
  8. Deforestation flowers.
The first thing we need is a cardboard box from the usual (from equipment, household chemicals, furniture) and a spray bottle. With the spray damp one-way cardboard and wait 10 minutes.



Then, carefully remove the top layer of cardboard and leave until the next day to a well dried out



When cardboard dried out, you can start cutting strips. I do not have a special mat, which can be cut, so I adapted to the sheet of chipboard. Mark up with a ruler the width of the strips (1 cm). Substitute a metal ruler and cut off. Instead of a metal ruler my old piece of metal cornice. The blade from the knife should be changed frequently. Then at the edge of the strip will be smooth.




I cut the strips just a lot, and then do one of the craft. When the end, again to cut. To cock and sliced ​​strips of corrugated cardboard. You can use and boxboard, then just paint.




You can start ... lubricating strip with white glue. I plastered, just gently squeezing the glue on the strip. Babies difficult to control the pressing force, so I pour glue into the jars washed out of gouache and brush are smeared with glue strips.




Now you can twist. Twist a little wait. If the glue as I have in the previous photo, the wait long - he "grasped" very quickly. If an ordinary PVA glue ( "master", "building", ...), then you need to keep a little longer.



If you need a large amount of procurement, for example, we have the body cockerel, the top of the resulting preform screwed another strip, aligning the ends.




To twist the cockerel two circles, one larger and one smaller. And glue them together. The guys are glued on the oilcloth and allowed to dry completely before the next session. In the meantime, you can make other items.




For example, the beak. To do this, spread the adhesive strip and fold both ends to the middle.




Received such a beak ...




To take the tail colored corrugated strips:.. Three of 10 cm and 13 cm on the three first glue the "loop" short strips, and then on top of them long, and then get the double loops are glued together. For scallop braid strips in circles (three pieces). Strips scallop 30 cm.




The most difficult thing to do for children's feet. We can compare with blank tabs for "crown" or draw a diagram on paper marker. Folded better from the middle. You can first bend, then straighten, spread glue, bend again.




Wings of oval and twisted them in another way: the tip of the folded strips (the guys I say "three waves"), 




Then the painting. Paint the trunk with the head (already glued), wings. Once dry, you can gather: glue first one wing, comb, glue the tail, beak. Allow to dry. Once dry, glue the other wing.




Glue eyes (can be made of felt, you can try purchased). To Cockerel standing, we have made it podstavochku. There needed my help. Glued to the cockerel podstavochki using the glue gun. Podstavochki children decorate flowers, ribbon tied around the neck.
Cockerel ready!



In this technique, we do a lot of other crafts. Here are some of them ... bunny and teddy bear.









I wish all the inspiration!


coursty - podelki-doma.ru