HOW TO MAKE UMBRELLA-GIFT BOX



RING TO YOUR ATTENTION MK UMBRELLA SUITES DESIGN WITH BOXES FOR CANDY UMBRELLA INSIDE THE CONE. WE NEED: CARDBOARD, GLUE, GLUE GUN, CORRUGATED PAPER, CLOTH UMBRELLA, WIRE SPOKES UMBRELLA AND CANDY (I – FLORAL), FOAM OR PENOPLEX (I – PENOPLEX, IT IS LESS FRAGILE), CORD, RIBBON, BEADS AND ETC.. FOR DECORATION AND, OF COURSE, SWEETS.




IN MY UMBRELLA REMOVED THE UPPER PART – THE HANDLE AND THE TOP OF THE CONE WITH A “STOPPER”, AND THE INSIDE OF THE CONE CAN BE PLACED EXTRA CANDY OR SMALL GIFT. NOW YOU’RE READY!



TAKE CARDBOARD A3 OR TWO A4 GLUED (I GLUED, AS THE IDEA OF MAKING AN UMBRELLA CAME UNEXPECTEDLY, AND LARGE SHEETS OF CARDBOARD IN THE HOUSE THERE WAS NO …), DRAW ON THE SHEET AND CUT OUT THE CIRCLE SECTOR PLUS 1 CM ON ONE SIDE FOR GLUING CONE. SIDE LENGTH IS EQUAL TO THE LENGTH OF THE UMBRELLA.


I PASTED COLORED PAPER CONE, CLOTH UMBRELLA BECAUSE I HAVE A TRANSLUCENT, MOREOVER, LIKE TO THE INSIDE OF THE CONE-BOX WAS ALSO CUTE … WISHES TO SIMPLIFY YOUR LIFE CAN SKIP THIS STEP. HE SHOOK HIS FUTURE CONE THREAD UNTIL HE PLOWS THAT THEN IT WAS EASIER TO GLUE. THEN GLUED CONE.



CUT FABRIC QUADRANT, SIDE LENGTH OF 3-4 CM LONGER THAN THE CONE, SEWED ON A CURVED EDGE OF THE LACE, SEWN INTO A CONE, CUT A COUPLE OF CENTIMETERS FROM VESCINE CONE (A CONE HOLE TURNED OUT AT THE BOTTOM). WHO WISHES TO RECEIVE THE UMBRELLA PLEATED BIT FANCIER CAN TAKE A QUARTER AND HALF OF THE CIRCLE.



CUT OUT A SMALL PENOPLEX KONUSIK, ITS TOP PLASTERED CORRUGATED PAPER PASTED ON THE EDGE OF THE ELASTIC TAPE, PASTE IT INSIDE A CARDBOARD CONE (GET SMALL BEDPLATE)



CUT FROM PENOPLEX 2 CM THICK TWO LAPS, THE TOP DIAMETER EQUAL TO THE DIAMETER OF THE CONE, THE BOTTOM – A LITTLE LESS. CIRCLES LAID ON TOP OF EACH OTHER, SHOULD BE INCLUDED IN A CONE LIKE A CORK (THAT IS, THEY BOTH HAVE A TAPERED CYLINDER SHAPE). WARNING, BE CAREFUL WHEN FITTING – YOU CAN SHOVE THEM SO TIGHTLY THAT IT WILL BE DIFFICULT TO REMOVE. FROM THE CENTER OF THE SMALLER CIRCLE CUT OUT A SMALL CYLINDER (THIS WILL BE THE OPENING OF OUR CASKETS)



GLUE CYLINDER OF A LARGE PART


PASTE ALL CORRUGATED PAPER


BAGEL” IS ALSO PASTE CORRUGATED PAPER AND PASTE IT INTO A CYLINDER. GLUE STRING, WHICH WILL THEN HANG UMBRELLA


THE UNDERSIDE OF THE CONE IS INSERTED TO DECORATE A PIECE OF THE CHINESE STICKS OR WOODEN SKEWERS. TO DO THIS, CUT THE EDGE OF THE CONE, AND THEN GLUE AND STICK A STICK IN THE BOTTOM OF THE CONE (REMEMBER, WE GOT PASTED SMALL KONUSIK). THE SECOND SIDE OF THE LACE IS ALSO STUFFED INSIDE AND TAPED. IT IS IMPORTANT TO THREAD THE CORD GLUING IT (OR PUT ON A CARDBOARD CONE) CONE OF CLOTH, OTHERWISE THEN PUSH IT INTO PLACE WILL NOT SUCCEED.


WIRE AND RIBBONS MAKING CORRUGATED PAPER SPOKES (8 PIECES OF) PASTED ON THEIR TOP CONE MADE OF CARDBOARD WITH EQUAL INTERVALS APART (THE TOP AND BOTTOM EDGE OF THE HOOD, THE MIDDLE CAN NOT STICK, THEY WILL NOT DISAPPEAR UNDER THE CLOTH). THE TOP OF THE WIRE ABOVE THE UPPER EDGE OF THE CONE 1.5 CM, BOTTOM CUT OFF AT THE BOTTOM OF THE CONE. GLUE THE FABRIC TO THE CONE OF THE SPOKES ON THE UPPER EDGE OF THE UMBRELLA, BEADS STICKING TO THE TOP OF THE SPOKES.


IT TURNS OUT SOMETHING LIKE THIS (SORRY FOR THE QUALITY OF THE IMAGE). FORM THE FOLDS OF FABRIC DECORATE AN UMBRELLA IN LENGTH (I MADE TWO RIBBONS WITH BOWS), BUTT PASTE “DONUT” AND TAPED CONE, VISIBLE INSIDE OF THE KONSUSA CORRUGATED PAPER, DECORATE THE JUNCTION CONE AND STICKING PINS IN THE BOTTOM OF THE UMBRELLA. UMBRELLA HIMSELF READY. NOW STICK WITH CORK.


WE PUT IN THE “PLUG” STIFF WIRE, FOLDED IN THE FORM OF AN UMBRELLA HANDLE (I HAVE THE STRENGTH FOR IT PODZAGNULA INSIDE THE TUBE) AND GLUE


WINDING THE HANDLE TAPE (I HAVE TO ADD VOLUME PAVED INSIDE FOAM), TRY ON THE PLACE. UMBRELLA IS READY.


SO HANDLE LOOKS ALONE. FURTHER WORK ONLY WITH IT – DECORATE HER FLOWER ARRANGEMENT WITH CANDY – AND WE FINISHED THE PRODUCT.


HERE’S WHAT I GOT!














COURTESY: LIVEINTERNET