How to make organizer





Let us learn then ???? Bill of Materials – Latinha – Interfacing double-sided teclabel – Cotton Fabric Fernando Maluhy – Felts Santa Fe – Satin Ribbons – We Care About Buttons – embroidery threads – kite line nro 10 – Iron – hot glue – Scissors – sewing Needle How is something that gives to do with different types of tin will not be’ll get me the steps, okay? Each will adapt the tin you want! the one I used was one of those cookies, typical of this time of year-end!

1. Then the first step is to take the measure of the circumference of the can height and the same!


2- Then just scratching the measure in circumference and height at interlining double-sided, cut and pass the fabric! The use of the stabilizer is similar to the fusible famous!


3- Follow cutting the fabric in the size of the stabilizer already pasted


4) Then just remove the film stabilizer, the fabric will adesivado. There is only going pasting the tin gradually like a label



5) The tin will look like, all covered



6) To be finished better pasted a satin ribbon around the entire can at the top and at the bottom!I used hot glue! Thus it covers possible imperfections and prevents tissue become unraveled.
To the bottom of the finish it is also possible to scratch the interlining with the height greater than the tin. There will remain adesivado fabric at the bottom, you can paste at the bottom of the can and then cover with a felt circle, for example! I did so in the other tin (green).



7- To the can get even more functional and charming, made a felt pocket to paste on the side. The course size will depend on the size of the tin. It should not be something not too big and not too small! Choosing the size cutting rectangles into two pieces of felt! Here also I used the pinking shears! Which is optional!


8- Sobreponho the two rectangles and sew with basting stitches all around! I take and now sew a well-button in the middle of the pocket


9- To paste the reticule in the can, I used hot glue again! First lap the bottom, just above the end of the tin. This part should be glued a little ruffled, so you have room in your pocket. After lap the side. The top is open!


10- To embellish and improve over the finish, I made a little bow with the same tape and pasted on the tin along with a button, just above the junction of the two parts of the tape. The pocket was also glued on top of that junction at the bottom.



11. I made a simple little flower to adorn the most tin! In this case I cut 5 petals (which are actually half-circles) in two different sizes. I put the smaller petal on top of the largest and then basted the ends and pulled to pucker. After I joined the two ends and arrematei, as in the simplest fuxico flower.
You can use any flower or other embellishment you like! Can be fuxico flower or another flower felt like I used the green tin! Anyway, just get creative!



12- To accompany the little flower, cut two pieces of satin ribbon and pasted almost forming a bow on top of the tin, as shown in photo


13- Above pasted the little flower and button. All with hot glue


14- To conclude decked the can with other cute buttons! I glued with hot glue! And here again, it is creativity! It has several things that can be placed to complement the decor!


15- And presto! Its tin is all ready to be used or for gift giving!
thank you!
courtesy: pripri-artmimos.blogspot